Skip to content
  • Deadlines
  • UK
  • Procurement Act 2023

How long are UK government tenders open? Minimum time limits

The minimum tendering periods under the Procurement Act 2023: 25 days in the standard case, 10 days in listed cases, and how to see a tender coming earlier.

A UK government tender under the Procurement Act 2023 must normally stay open for at least 25 days. That’s the minimum where tenders are submitted electronically and all the tender documents are available when the tender notice is published. In several listed cases the minimum is 10 days, and for some contracts there’s no fixed minimum.

Say you run a small grounds maintenance firm. A tender that suits you turns up in your saved search, and the closing date is only days away. It feels as if the buyer has sprung it on the market. In fact the buyer published a planned procurement notice weeks earlier, which is what allowed the short window, and the firms that saw that notice have been getting ready ever since. You’re starting your bid while they’re finishing theirs.

So the number of days a tender is open is only half of what you need to know. The other half is how to see it coming, and both are below.

The periods come from section 54 of the Act as set out in Cabinet Office guidance last updated on 17 August 2026. They apply to procurements started on or after 24 February 2025.

What is the minimum tendering period?

The tendering period is the time between the buyer inviting tenders and the deadline for submitting them. It starts with the day after the invitation and ends on the day tenders are due.

CircumstanceMinimum tendering period
Tenders submitted electronically, all tender documents provided with the tender notice25 days
Tenders submitted electronically, not all tender documents provided with the tender notice30 days
Tenders not submitted electronically, all tender documents provided with the tender notice30 days
Tenders not submitted electronically, not all tender documents provided35 days
A qualifying planned procurement notice was published10 days
Contract awarded under a dynamic market10 days
State of urgency10 days
Utilities or non-central government authority, tenders invited from pre-selected suppliers only, no shorter period agreed10 days
Utilities or non-central government authority, period agreed with pre-selected suppliersNo minimum (as agreed)
Light touch contractNo minimum

Is there a separate period for the first stage?

Yes, where the buyer runs a multi-stage competitive flexible procedure and first asks suppliers to submit a request to participate. That first stage has its own minimum, called the participation period.

CircumstanceMinimum participation period
Standard case25 days
State of urgency10 days
Light touch contractNo minimum

An open procedure has a single stage, so only the tendering period applies. In an open procedure, any tender documents must be available from the outset, attached to the notice or through a direct link.

When can a tender be open for only 10 days?

A qualifying planned procurement notice

A planned procurement notice (notice type UK3 on Find a Tender) gives early warning of a competitive procurement. It is “qualifying” when it was published at least 40 days and no more than 12 months before the tender notice. When one exists, the buyer may cut the minimum tendering period to 10 days.

You get at least 40 days of warning in exchange for a shorter formal window, but only if you saw the earlier notice.

A dynamic market

A dynamic market is a list of qualified suppliers who can bid for future contracts. For contracts awarded under one, the minimum tendering period is 10 days. Only members can be awarded the contract, so apply to join the markets in your category early.

Urgency

A buyer can reduce the participation and tendering periods to 10 days where it considers there is a state of urgency that makes the usual minimum impractical. Guidance says the decision must rest on an objective need.

What about small contracts below the threshold?

The section 54 minimums apply to competitive tendering procedures for public contracts, which means contracts at or above the legal thresholds. As of 1 January 2026 those thresholds are £135,018 for central government goods and services and £207,720 for sub-central authorities, including VAT.

Below those figures, guidance on below-threshold contracts says only that the buyer “must provide a reasonable time period in the below-threshold tender notice for the submission of tenders”, the same for all suppliers. The window on a small contract can be shorter than 25 days, so check the closing date on each notice.

Do buyers have to give more than the minimum?

They have to think about it. When setting any time limit, a buyer must have regard, where relevant, to:

  • the nature and complexity of the contract
  • the need for site visits, physical inspections and other practical steps
  • the need for sub-contracting
  • the nature and complexity of any modification to the tender notice or tender documents
  • the importance of avoiding unnecessary delay

The guidance also says small and medium-sized enterprises may face particular barriers to participation, and that a longer period is one way to remove them. Whatever period is set must be the same for all suppliers.

If a deadline looks unworkable for the size of the job, say so early through the clarification route in the tender documents. Buyers are free to set longer periods.

How do I see a tender before the clock starts?

The formal window is the last stage of a longer process, and much of that process is public. Three Find a Tender notice types appear before a tender notice.

NoticeWhat it signalsHow far ahead
UK1 pipeline noticeA large buyer’s planned public contracts worth more than £2 millionCovers an 18-month period
UK2 preliminary market engagement noticeThe buyer is engaging with suppliers before a tenderVaries
UK3 planned procurement noticeA competitive procurement is comingAt least 40 days if it is to qualify for a shorter tendering period

Pipeline notices are required from authorities that expect to pay more than £100 million under relevant contracts in the coming financial year. They must be published within 56 days of the start of that financial year, which the guidance gives as 26 May.

Early notices also seem to improve competition. Open Contracting Partnership’s review of the first year of Procurement Act data found that procedures with a preliminary market engagement or planned procurement notice averaged 4.7 bids, against 3.8 without.

A routine for early warning

  1. Save a Find a Tender search for your CPV codes and regions with the notice types UK1, UK2 and UK3 selected.
  2. Save a second search for UK4 tender notices with the same filters.
  3. When a UK2 or UK3 notice appears, respond to any market engagement and note the earliest possible tender date.
  4. Start gathering the standard material then: supplier information, case studies, policies, insurance details.

That way the tender notice, when it comes, finds you with most of the paperwork already in hand.

What happens after the deadline?

For most public contracts, the buyer sends each supplier that submitted an assessed tender an assessment summary, then publishes a contract award notice. Publication starts the standstill period.

StepRule
Assessment summarySent to all relevant suppliers at the same time, before the contract award notice is published
Standstill periodAt least eight working days, beginning with the day the contract award notice is published
Earliest signingWorking day nine. Weekends and bank holidays do not count

Mandatory standstill does not apply to call-off contracts under a framework, contracts awarded under a dynamic market, light touch contracts and certain urgent direct awards. A buyer can choose to apply a voluntary standstill, which must also be at least eight working days.

Watch the units when you count: tendering periods are set in days, and the standstill period is set in working days.

How much time do you really have?

Less than the open window, because your useful time starts when you find the notice. On a 25-day tender, if you see it on the second day you have 23 days left. Find it on day 15 and you have 10. On a 10-day tender found on day 6, four days remain.

Lead times inside your own business shorten it further. Getting a reference signed off, pricing from a sub-contractor or a director’s approval can each take days.

The National Audit Office’s 2023 review of competition in public procurement, written under the previous regulations, told authorities to “ensure there is enough time to follow the process correctly”. The same applies on your side. Email alerts from a saved search on Find a Tender are free, and they remove one avoidable reason for a late start.

Sources

All opened on 15 November 2026.

Frequently asked questions

How many days is a UK government tender open?

At least 25 days in the standard case under the Procurement Act 2023, where tenders are submitted electronically and all tender documents are provided when the tender notice is published. The minimum is 30 or 35 days in some cases and 10 days in others. Buyers can and often should allow longer.

Can a UK tender be open for only 10 days?

Yes. The minimum tendering period is 10 days where the buyer published a qualifying planned procurement notice at least 40 days and no more than 12 months before the tender notice, where the contract is awarded under a dynamic market, or where there is a state of urgency.

Is there a minimum time for small, below-threshold tenders?

There is no fixed number of days. Guidance on below-threshold contracts says the buyer must provide a reasonable time period for the submission of tenders, and it should be the same for all suppliers.

When does the tendering period start?

It starts with the day after the buyer invites tenders and ends on the day tenders are due. In an open procedure that invitation is the publication of the tender notice.

What is the standstill period after a contract award?

It is a pause of at least eight working days, beginning on the day the contract award notice is published, before the buyer can sign the contract. It does not apply to framework call-offs, dynamic market awards or light touch contracts, though a buyer can choose to apply one.

Do these time limits apply to every tender I see?

No. They apply to competitive tendering procedures for public contracts under the Procurement Act 2023, which covers procurements started on or after 24 February 2025. Call-offs from frameworks set up earlier still follow the Public Contracts Regulations 2015.

Written by Ketul Shah

Ketul Shah is the founder of TrackTender, a tender alert service that runs in India. These guides are researched from official UK sources, which are listed at the end of each one.

More about TrackTender →

Want this as a daily list?

TrackTender is not open in the UK yet. Join the waiting list and we will write once when it is.

Join the waiting list