--- title: How long are government tenders open? GeM bid timelines · TrackTender description: GeM bids can close in 10 clear days. Subtract weekends and the lag before you even see the tender, and the real prep window collapses to 4 or 5 days. canonical: https://tracktender.com/blog/how-fast-government-tenders-get-missed/ source: https://tracktender.com/blog/how-fast-government-tenders-get-missed/ --- # How long are government tenders open? GeM bid timelines > GeM bids can close in 10 clear days. Subtract weekends and the lag before you even see the tender, and the real prep window collapses to 4 or 5 days. - [Blog](/blog/) / - How long are government tenders open? GeM bid timelines Find tenders - Finding tenders - Bidding - GeM # How long are government tenders open? GeM bid timelines GeM bids can close in 10 clear days. Subtract weekends and the lag before you even see the tender, and the real prep window collapses to 4 or 5 days. KSKetul Shah15 June 2026 · Updated 13 July 2026 · 6 min read Copied The short version GeM standard bids stay open a minimum of 10 clear days; central buyers often allow 15, custom bids 21, and re-floated bids 45. In this guide - [How long is a GeM tender actually open?](#how-long-is-a-gem-tender-actually-open) - [Ten clear days is not ten usable days](#ten-clear-days-is-not-ten-usable-days) - [The discovery gap is where bids die](#the-discovery-gap-is-where-bids-die) - [The volume isn’t the obstacle — the filtering is](#the-volume-isnt-the-obstacle--the-filtering-is) - [What to actually do about the clock](#what-to-actually-do-about-the-clock) - [Footnotes](#footnote-label) - [Frequently asked questions](#faq) Key takeaways - GeM standard bids stay open a minimum of 10 clear days; central buyers often allow 15, custom bids 21, and re-floated bids 45. - After weekends and the lag before you even see the tender, a 10-day window is often only 4–5 usable days. - Most missed tenders are lost to discovery latency, not price — the bid closed before it was ever read. - Same-day alerts on a channel you actually check (WhatsApp/Telegram) recover the days a manual portal check loses. A standard GeM bid can close just 10 clear days after it publishes — 15 for many central buyers, 21 for custom bids. Take out a weekend and the two or three days before you even saw it, and the window you actually get to prepare a bid is often four or five days. Most suppliers who lose a tender assume they were outbid. Watching the government tender stream all day (I built TrackTender, so I’m hardly a neutral witness), I’d say a large share are lost earlier and more quietly than that: the supplier never opened the bid in time, because the window between a tender going live and its deadline is shorter than the rhythm of a busy SME checking portals by hand. The clock is the part people underestimate. So here’s exactly how much time a government tender actually gives you, where that time leaks away, and why “I keep missing tenders” and “the portal is hard to search” turn out to be the same problem. ## How long is a GeM tender actually open? Less time than most suppliers assume. Under the [Government e-Marketplace (GeM)](https://gem.gov.in/) bidding rules, the minimum windows are short: - Standard bids: at least **10 clear days** from publication to the bid-submission deadline. Central-government buyers commonly set 15. - Custom (catalogue-based) bids: a minimum of 21 days. - Second-time bidding (when a bid is re-floated): a minimum of 45 days. Those are the *minimums*, and buyers regularly use them. (Separately, the price you quote stays valid for 180 days once submitted — but that’s about price stability after bidding, not the time you get to prepare. The [GeM bidding process](/blog/gem-bidding-process-explained/) has its own stages after the deadline.) The sources for these timelines are GeM’s own General Terms and Conditions and published GeM guidelines.[1](#user-content-fn-1)[2](#user-content-fn-2) So the honest answer to “how long do I have?” is: often as little as 10 working-adjacent days, sometimes 15, occasionally 21. That sounds workable. It usually isn’t. ## Ten clear days is not ten usable days Inside that window you have to: - read the specification and confirm you’re [actually eligible](/blog/tender-eligibility-criteria-explained/), - arrange the [EMD](/blog/emd-epbg-mii-mse-tender-terms/) (earnest money deposit), - get [documents in order](/blog/documents-required-government-tenders/), sometimes attested, - possibly chase an [OEM authorisation or MAF](/blog/oem-authorization-maf-for-tenders/), - and only then prepare and submit the bid. Now subtract reality. Two of those ten days are usually a weekend. If you found the tender three days after it published, you’ve started the clock at day three. A 10-day legal window has quietly become a four-to-five-day real window — for a procurement decision that can be worth lakhs or crores. The tender isn’t lost on price. It’s lost in the gap between when it went live and when the supplier found out. ## The discovery gap is where bids die Here’s the mechanism, and it has nothing to do with how competitive your quote is. A supplier who checks a portal “a couple of times a week” carries a built-in lag between a tender publishing and them seeing it — *if* they see it at all, and *if* the keyword they searched happened to surface it. On a 10-day window, a two- or three-day discovery lag is not a rounding error. It’s 20–30% of your entire preparation time, gone before you’ve read a single line of the specification. This is why “I keep missing tenders” and “the portal is hard to search” are the same complaint. The portal isn’t really the problem; the **latency** is. Every day between a tender publishing and you discovering it is a day removed from an already short clock. On the shortest windows, it’s the difference between bidding and finding the tender after it has already closed. (I’ve gone deeper on this failure mode in [what SMEs get wrong about finding tenders](/blog/what-smes-get-wrong-about-finding-tenders/).) Close the discovery gap TrackTender reads every GeM tender the day it publishes, AI-parses the PDF for EMD, deadline and quantity, and pushes the ones matching your states and categories to your Telegram or WhatsApp — so the two-day lag never eats your window. [Get matched tenders →](/subscribe/) First month ₹30 (about ₹1/day), then ₹300/month. Cancel anytime. ## The volume isn’t the obstacle — the filtering is It’s tempting to blame the sheer size of GeM. The platform is enormous: it crossed **₹5.4 lakh crore in gross merchandise value in FY 2024-25**, serves over 1.6 lakh government buyers and 22 lakh-plus sellers, and lists 10,900+ product categories.[3](#user-content-fn-3)[4](#user-content-fn-4) No human can watch all of that. But the relevant slice for any one supplier is tiny. A Surat HVAC contractor doesn’t need 10,900 categories; they need the handful of [HVAC and air-conditioning tenders in Gujarat](/tenders/gujarat/hvac-air-conditioning/) — and whatever neighbouring states they can actually deliver to — in a given week. The difficulty is never the total volume — it’s pulling your small, relevant slice out of the flood before the short window closes, especially when the bid you needed is filed under a title that doesn’t contain the words you would have searched for. So the SME gets squeezed from both sides. Search broadly and you drown in irrelevant results. Search narrowly and you miss the turnkey works contract that needs your product but is classified under “installation.” Either way, the short live window leaves little room to recover from a miss. ## What to actually do about the clock None of the fixes are about bidding harder. They’re about protecting the days you have. - **Treat the clock as the constraint, not the competition.** Your win rate is bounded by how many relevant tenders you see *with enough days left to bid well*. Optimise that before anything else. - **Cut the discovery lag to near zero.** If the window can be as short as 10 days, a two-day delay costs you a fifth of your preparation time on every bid. The cleanest fix is to stop checking and start being told — alerts that reach you the day a tender publishes, on a channel you genuinely check, like WhatsApp. (There’s a whole market of [tender alert services](/blog/best-tender-alert-services-india/) built on this one insight.) - **Match on the document, not the title.** The bids most often missed are the ones with misleading titles, because a short window leaves no time to catch the misclassification by browsing. Filtering on what’s inside the bid document, not its label, is what surfaces them. - **Have your paperwork ready before the window opens.** Keep your EMD route, standard documents and authorisations prepared, so the 10-day clock is spent on the bid itself, not on assembling basics. A supplier who does these things doesn’t become more competitive on price. They become *present* — bidding on tenders they would otherwise never have seen in time. For most SMEs chasing government work, that is the larger lever by far. *This is the thinking behind [TrackTender](https://tracktender.com): we read every GeM tender as it publishes, pull out the bid number, deadline, EMD and buyer, and push the matching ones to your WhatsApp or Telegram the same day — so the 10-day clock is yours to use, not yours to lose.* ## Footnotes - GeM Terms & Conditions, Government e-Marketplace — [https://org.gem.gov.in/termsCondition](https://org.gem.gov.in/termsCondition) [↩](#user-content-fnref-1) - Guideline on Government e-Marketplace (GeM), Sambalpur University — [https://www.suniv.ac.in/docs/Guide-line-on-GeM-SU.pdf](https://www.suniv.ac.in/docs/Guide-line-on-GeM-SU.pdf) [↩](#user-content-fnref-2) - “Government e-Marketplace achieves ₹5.4 lakh crore GMV in FY 2024-25,” Press Information Bureau / NewsOnAir — [https://www.newsonair.gov.in/government-e-marketplace-achieves-%e2%82%b95-4-lakh-crore-gmv-in-fy-2024-25](https://www.newsonair.gov.in/government-e-marketplace-achieves-%e2%82%b95-4-lakh-crore-gmv-in-fy-2024-25) [↩](#user-content-fnref-3) - “Government e-Marketplace (GeM) Achieves Rs. 18.4 Lakh Crore GMV,” IBEF — [https://www.ibef.org/news/government-e-marketplace-gem-achieves-rs-18-4-lakh-crore-us-197-72-billion-gmv-emerges-as-key-digital-public-procurement-platform](https://www.ibef.org/news/government-e-marketplace-gem-achieves-rs-18-4-lakh-crore-us-197-72-billion-gmv-emerges-as-key-digital-public-procurement-platform) [↩](#user-content-fnref-4) ## Frequently asked questions How many days is a government tender open on GeM? Standard GeM bids must stay open at least 10 clear days from publication to the submission deadline. Central-government buyers commonly allow 15 days, custom (catalogue-based) bids a minimum of 21 days, and re-floated second-time bids at least 45 days. Why do SMEs keep missing tenders they were eligible for? Usually discovery lag, not competitiveness. A supplier who checks portals a couple of times a week loses two to three days before even seeing a bid. On a 10-day window that's 20–30% of the preparation time gone — and on the shortest bids, the tender has often closed before it's found. How long is a bid price valid on GeM? The price you quote on GeM stays valid for a minimum of 180 days after submission. That's about price stability during evaluation — separate from the much shorter window you get to actually prepare and submit the bid. What is the fastest way to stop missing government tenders? Cut discovery lag to near zero. Instead of checking portals manually, get matching tenders pushed to you the day they publish, on a channel you already use, with the deadline and key terms attached — so the short window is spent preparing the bid, not finding it. KS Written by Ketul Shah Ketul Shah is the founder of TrackTender and Anekant AI. He works with Indian SMEs that bid on government contracts and writes about GeM, e-procurement and how smaller suppliers can compete and win. [More about TrackTender →](/about/) Keep reading ## More from the blog - [13 July 2026GeM bid status: how to check your tender result (and read it)How to check GeM bid status from the seller dashboard, what each evaluation status means, how to see the published result with competitors' prices, and how to use it.](/blog/gem-bid-status-tender-results/) - [13 July 2026GeM product upload: catalogue listing and brand approval, explainedHow to upload products on GeM, why listings get rejected, how brand approval and its three-attempt limit work, and what the Q1–Q4 category quadrants mean.](/blog/gem-catalogue-upload-brand-approval/) - [13 June 20265 Tender Tiger alternatives for government tenders in 2026Five honest, fact-checked Tender Tiger alternatives for Indian businesses, what each tender alert service does well, and how to pick the right one.](/blog/tender-tiger-alternatives/) ## Stop reading about tenders. Start winning them. Pick your states and categories and get matching tenders on Telegram and WhatsApp. [Start tracking](/subscribe/)